Unequal Section Design Welded Plate Heat Exchanger
Plate heat exchanger Classification
All-welded plate heat exchanger is a kind of plate type heat exchangers that can endure high temperature and high pressure. Highest temperature 400°C, pressure 3.5Mpa. Relying on application practices, Fully welded plate heat exchangers are applied in oil and gas industry, refinery applications, pharmaceutical industry, chemical/petrochemical industry.
Performance features
1. Unequal section design for heating and air conditioning
2. Compression molding technology
3. Hanging point design
Material of plates and the application
| 304 stainless steel | This is the lowest cost heat transfer plate material. It has a low corrosion resistance and is usually only available in a thickness of 0.4mm. This type of heat transfer plate is typically used on HVAC applications. |
| 316 stainless steel | This is the most common heat transfer plate material and is used in many applications. 316 stainless steel has a high corrosion resistance and is typically available in thickness from 0.4mm up to 0.8mm. |
| Titanium | This has a very high resistance to chemical attack including most acids, chlorides,sea water,and chlorine chemicals. Titanium is usually available in thicknesses from 0.5mm up to 0.6mm. |
| Hastelloy C276 | Other common names: Alloy C276, Hastelloy C, Inconel® C-276 Hastelloy C-276. Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C-276 is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas. Thickness available from 0.6mm to 0.8mm. |
Application:
| Materiel | Application |
| SUS304 SUS316L | Clean water, river water, food oil, mineral oil |
| Ti | Sea water, salt water, salt |
| Hadtelloy Alloy | Concentrated sulfuric acid, hydrochloric acid, phosphoric acid |
| Nickel | High temperature and high concentration caustic soda |
Advandages of Plate Heat Exchanger
· Flexible Design: Customized solution, easy installation
· Optimized performance:optimized design according to system parameter, stable operation, minimize the cost
· ŸFast delivery: help our customer to increase turnover
· 100% product test: 100% pressure and leakage test, high reliability
· Fully product range: copper and nickel brazing, single, dual system and double wall product
· Compact: less space, easy installation
· High design pressure: 45bar design pressure, excellent solution for R410A, etc new refrigerant
Product Tags:
|
|
Unequal Section Welded Plate To Plate Heat Exchanger 3.0MPa Images
|
